Finding the best work boots for flooring installers can be a bit difficult. Given that there are so many work boot options now, selecting the perfect fit for your work type can be a bit confusing.
But, do not worry, we have got you covered! After careful investigation and selection, we have selected a few of the top work boots for you.
Because tile setting requires a lot of hard work and manual labor, you need protective boots. This is also a task that requires a lot of time to complete. Therefore, you are going to be wearing your work boots for quite a long time at work. This is why the boots also have to be comfortable.
Getting confused about which boot will be perfect for this line of work? Let’s get into our list of work boots for tile setters then!
What Kind Of Boots Is Good For Tile Setters?
Tile setting is a very labor-intensive job. You have to walk around a lot, and constantly be in motion.
There are a lot of risks involved with the task as well. Oftentimes, places where you have to set tiles might have electric hazards.
That is why the first thing that we will recommend is getting a boot that gives you protection from electric exposures.
Next, you need to invest in a boot that has a waterproof membrane. You have to work with cement, concrete, a lot of other liquid products when setting tiles. Wearing waterproof boots will ensure that these liquids don’t touch your feet.
Boots that have a safety toe on them will be better for this task as well. In case something falls on your feet, your toes, which are the most sensitive part of your feet, will remain protected.
What To Look Before Buying The Best Work Boots For Flooring Installers?
Flooring installers have to go through a lot at work. As we have mentioned before, this is not an easy task. That is why to be protected at work, you need to invest in proper gear.
Buying a good quality work boot is essential for floor installers. Here are some of the features that your boots need to have to be the perfect fit for work.
1. Good Fit
Boots that don’t fit well can be very uncomfortable to wear. Your feet will move around a lot inside boots that are too big for you. This will cause chafing and scabs to form on your feet.
On the other hand, boots that are too tight can be uncomfortable to wear for long hours as they press on your feet.
If you have wider feet, make sure you invest in boots that have wide openings. Getting the perfect fit for your work boot is crucial if you want to be comfortable throughout the day.
2. Comfort
Comfort will depend on the type of material that the boot was made with. Try to invest in boots that are made with 100% leather, or a mix between leather and synthetic fabric. Rubber soles are also a good option to go with.
The material of your work boots should be breathable. This will help get rid of any trapped moisture and will keep your feet dry all day long.
3. Waterproof
Tile setting work requires workers to deal with a lot of liquid materials. Be it concrete, or cement, there’s no saying what you might come across at work as a flooring installer.
That is why you need to get boots that have a waterproof layer. Liquids should not be able to enter the boots. This way your feet will remain dry and untouched by any of the liquids that you are working with.
4. Electric Hazard Protection
Construction sites often have a lot of electric appliances. For this, workers use electrical wires in a very unruly way.
Workers need to stay protected from electrical hazards in these work areas. As a tile setter who is going to be working on construction sites, it is very important for you to get boots that will protect you from any sort of electrical accident.
5. Safety Toe
Again, when working on construction sites, there’s no saying what object might fall onto your feet. Because there are a lot of workers working in the same environment at the same time, it is very normal for minor accidents to occur.
Tiles may sometimes slip from a worker’s hand and fall on your feet. To stay protected in a situation like this, you need a boot that has a safety toe feature.
Best Work Boots For Tile Setters
Are you confused about which work boot you should buy as a flooring installer? Worry not, we have accumulated all of the top work boot options here for you to choose from!
KEEN Utility Men’s Pittsburgh 6″ Steel Toe Waterproof Work Boot
Flooring installers need boots that have steel toe protection. That is why we have put this work boot from Keen Utility on top of our list.
The added steel toe protection can keep your feet safe from falling objects.
Besides that, there is also a foothead added to the boot that can be removed when necessary. This foot head has a metatomical construction and is made with dual-density construction for added protection.
Also, the boots have rubber soles which will last a long time. Rubber soles are also good for boots that are going to be worn for long hours.
Made with 100% nubuck leather, you can count on this pair to last ages.
The boot opening is 12 inches around, and can therefore cater to wider feet.
Pros
- Can be worn by people who have wide feet
- Metatomical foot head made with dual density
- Steel toe protectors keep your feet safe
- Nubuck leather construction for added durability
- Soft rubber soles that are comfortable on the feet
- Comes in a variety of color options
Cons
- Eyelets on the boot are not durable
Wolverine Men’s Loader 6″ Soft Toe Wedge Work Boot
Getting boots that fit you perfectly can be quite challenging. Sometimes, the boots are too loose, and sometimes the boots are too tight.
These boots from wolverine have been made with a unique Goodyear welt structure. This allows the boots to fit like a glove. The boots mold to feet in such a flawless way, that it almost feels like a custom fit.
To keep debris and dirt from getting into your boots, the pair comes with a 6-inch shaft. The entire boot, including the upper, has been made with 100% leather. The upper has been constructed out of full-grain leather! You can expect this pair to last quite a few years easily, without needing frequent maintenance.
To keep your feet cool on hot summer days, they have added a padded collar. This creates a little bit of insulation and gets rid of excess moisture and heat inside the boots.
Pros
- Made with full-grain leather
- High 6 inch shaft keeps debris from getting inside the boots
- A padded collar keeps your feet cool even on hot summer days
- Comfortable soft wedge design
- Goodyear welt construction gives you the perfect fit
Cons
- Does not have any toe protection
Timberland PRO Men’s Barstow Wedge-m Work Boot
Timberland is quite famous for making high-quality boots. This timberland pro men’s Barstow wedge is no exception.
Just like most of their high-end boots, this one too has been made with 100% leather. On top of that, these boots come with a very flexible rubber sole.
No matter what you step on, the rubber sole dampens the impact. Even if you step on sharp objects, your feet will not feel anything.
To keep you protected on construction sites, the boot comes with electrical hazard protection. With that, you also get speed-lacing hardware for ease of wear.
Made with anti-fatigue technology, this dual-density boot will make sure you go home feeling fresh. There will be no sore feet at the end of a workday with these boots!
To make the boots even more comfortable to wear, the midsole has been made out of lightweight EVA. Mesh tongue linings keep the inside of the boot breezy and cool.
Pros
- Rubber soles dampen the impact
- Electric hazard protection added
- Dual-density construction with anti-fatigue technology
- Midsole is lightweight
- Mesh tongue lining keeps things cool inside the boots
Cons
- Boots are not true to size
- No steel toe protection
Cat Footwear Men’s Threshold Waterproof Industrial Boot
Tile setter’s boots need to be waterproof, but it is also important for work boots to be breathable.
This boot from Cat footwear comes with a breathable upper. Although the construction is made out of 100% leather, the material allows airflow.
This means that you can wear the boots for long hours without having to worry about sweat and moisture.
Besides that, these rugged boots have a rubber sole for comfort. The rubber sole is squishy and helps reduce fatigue.
The tall 5.25-inch shaft keeps dust and debris away from your feet.
The extra protection that this boot provides is slipping resistance. It has an outsole that has been designed to give you a better grip on wet floors.
On top of that, the material is waterproof. There is no risk of any form of liquid touching your feet when wearing these boots.
Pros
- Upper is breathable
- Waterproof material
- 5.25-inch shaft keeps feet safe from dust and debris
- A slip-resistant outsole gives you better grip
- Rugged design with high-quality eyelets
Cons
- No electric hazard protection
- No safety toe protection
Under Armour Men’s Stellar Military and Tactical Boot
Work boots for flooring installers don’t always have to be super expensive. There are a lot of reliable and affordable options in the market, such as the Under Armor Men’s stellar boot.
Besides being easy on the wallet, these boots are also quite durable. They have been constructed out of the perfect mix of leather and textile. Materials as such are flexible and comfortable to wear for long hours.
The leather being DWR treated, makes the exterior stronger. Even the nylon textile that has been used in the mix is a high-quality 900D type.
To keep the boots looking brand new, you can use polish on the toes. This will not cause any harm to the exterior.
Besides that, any liquid that touches the boot will dry in just a few seconds thanks to the quick-dry design.
For added comfort, the sole of the boots has been made out of rubber. This is no ordinary sole. It’s a low-profile, lug-style sole.
Pros
- Constructed out of a mix of leather and textile
- Leather is DWR treated, and textile is 900D type
- Toes can be polished
- Liquids dry quickly from the exterior
- Comfortable low profile rubber sole
Cons
- Takes a lot of time to break-in
Thorogood American Heritage 6 Moc Toe Work Boots
Work boots need to be protective, there is no doubt in that. A shock-absorbing footbed can help protect your feet when you step on uneven objects.
This work boot from Thorogood has a removable footbed. Made with polyurethane, the footbed comes in a dual-density form. It rests underneath your heel and protects your feet from impacts.
Also, this footbed is great for absorbing moisture. You can keep your feet dry throughout the day when wearing these boots.
Although the boot has been constructed out of 100% leather, it still has other features that make it more reliable. There is a moisture-sealed layer that protects the stitches and the overall construction of the boot.
The shaft of the boots measure 6 inches and is very flexible. It is a fiberglass construction that allows you to move freely without feeling restricted.
On top of all of these features, the boots also have a slip-resistant outsole. This outsole is very moldable and allows free movement.
Pros
- Comes with a slip-resistant outsole
- Fiberglass shank allows free movement
- Removable footbed
- The footbed absorbs sweat and moisture
- Available in five different shades of leather
Cons
- The glue used in the construction is not heat resistant
Timberland PRO Men’s Pull-On Work Boots
Timberland is one of the most well-known work and athletic boot brands. This model from the company is a 14-in calf-length work boot.
If you want a unique-looking boot to wear to work, this might be the perfect option. For ease of wear, these boots have a pull tab on both sides. There is no lace tying involved.
Made with 100% full-grain leather, the boots feature a unique synthetic sole. The leather is waterproof and of premium quality.
The waterproof membrane keeps your feet dry, while the breathable lining keeps moisture at bay.
To keep your toes safe, the boots feature a composite safety toe with a fiberglass shank. To top things off, this protection comes with carbon shield technology.
People with wider feet can easily put on the shoe, thanks to the 15.4-inch boot opening.
Pros
- Comes with a waterproof membrane and breathable lining
- Easy to wear pull-on boots
- Cool calf-length shaft
- Unique synthetic sole
- Features anti-fatigue footbed
Cons
- Synthetic soles are not so durable
My Verdict : What is The Best Work Boots for Flooring Installers
All of the options that we have mentioned on our list are of top quality. We are quite confident that you will be satisfied with any of these boots on our list.
But, if you asked us to choose just one from this list of seven boots, we would choose the Keen Utility men’s Pittsburgh 6-in steel toe work boot.
This is because the pair has all of the qualities that a boot for a tile setter needs to have.
It is waterproof, comes with steel toe protection, and also has a comfortable rubber sole. On top of that, the boots are available in four different color options!
Made out of nubuck leather, the boots will last you ages for sure.
If you have wider feet, this boot with a 12-inch round opening will be perfect for you.
What Material Should Work Boots For Flooring Installers Be Made Of?
Flooring installers’ boots need to be made out of waterproof material. The material should also be comfortable to wear for long hours.
We recommend getting boots that are made out of leather and have a waterproof membrane. Leather boots last a long time and are also comfortable to wear throughout the day.
What Is The Most Durable Material That Work Boots Can Be Made Of?
When it comes to durability, no other material can beat leather. Especially, boots that are made out of kangaroo leather, will last you ages without needing frequent maintenance.
What Is The Main Feature A Tile Setter’s Boots Needs To Have?
A boot purchased for a tile setter needs to have protection against electrical hazards. This is a very important feature, as there are a lot of loose wires on construction sites.
After this, the next most important feature is having a waterproof membrane.
What Is The Most Durable Boot Sole?
Rubber soles are the most durable. They do not get damaged easily, and are very flexible.
Some boot manufacturers will let you replace the rubber sole once it has become old. This way, you can refurbish the boot, and not have to purchase an entirely new one.
Comparison Chart
| Product | Material | Toe Protection Type | Sole Type | Shaft Height |
| Keen Utility Men’s Pittsburgh 6″ Steel Toe Waterproof Work Boot | Nubuck Leather | Steel Toe Protection | Rubber | 6 Inches |
| Wolverine Men’s Loader 6″ Soft Toe Wedge Work Boot | Leather | Soft Toe Boots, No Protection | Rubber | 6 Inches |
| Timberland PRO Men’s Barstow Wedge-M Work Boot | Leather | No Protection | Rubber | 6 Inches Approximately |
| Timberland PRO Men’s Barstow Wedge-M Work Boot | Leather | No Protection | Rubber | 5.25 Inches |
| Under Armour Men’s Stellar Military And Tactical Boot | Leather And Textile | No Protection | Rubber | 6 Inches Approximately |
| Thorogood American Heritage 6” Moc Toe Work Boots | 100% Leather | No Safety | Rubber | 6 Inches |
| Timberland Pro Men’s Pull-On Work Boots | Premium Full-Grain Waterproof Leather | Composite Safety Toe | Synthetic Sole | 14 Inch |
Conclusion
If you want to get your hands on good-quality work boots for floor installers, you need to consider a lot of features. Besides the price, there are other factors such as comfort, durability, and safety that you need to think about before making the purchase.
Luckily, there are a lot of options available in the market right now. This wide array of options gives you more flexibility when making the purchasing decision. But, more options mean more confusion.
If you are in a dilemma about which work boots you should get, you need to check out our best work boots for tile setters list. We’ve included a boot for every requirement group, so we’re confident that you will find your perfect pair here!
